Welcome to China TJK Machinery Beijing Co., Ltd. We are looking for Agent in South America! Call us!+86 10-84927034 or +86 13910833898 sitemap

sales@chinatjk.com;info3@chinatjk.com

China TJK Machinery Beijing Co., Ltd.

LOCATIONProducts > Stirrup Bending Machine > Wire Bending Machine

Wire Bending Machine

Stirrup Bender WG12D-4

Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted.


Features of Stirrup Bender WG12D-4



Pure electric CNC stirrup bending machine, traction compression volume is digital controlled according to the diameter, bending movements are electric controlled detected, ensures simpler and more stable operation;

 

Duplex bending axis set, matching a variety of molds, workable with stirrups size range 100mm-1380mm ;

High-speed non-delay bending action, maximum bending speed 1200°/S;


 


 


Newly designed multi-function bending mechanism workable with large circular arc stirrups, the max curved arc up to R35

Bidirectional 180° bending disc mechanism, avoid the stirrup of the collision, making the pass rate of 100%;

 


 

Traction wheel has a non-slip groove to prevent reinforcement in the process of slipping, transmission efficiency;


More Detail Stirrup Bender WG12D-4

Stirrup Bender WG12D-4(stirrup rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The bending and cutting unit of Stirrup Bender WG12D-4(stirrup rebar), driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this Stirrup Bender WG12D-4(stirrup rebar), many electric and pneumatic parts are imported from Japan and German, such as PLC, servomotor and reducer.

A Stirrup Bender WG12D-4(stirrup rebar) available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.

The Stirrup Bender WG12D-4(stirrup rebar) needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.

With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.


Technical Data of Stirrup Bender WG12D-4


Production capacity

Single wire

Φ5 – 12 [mm]

Double wire

Φ5 – 10 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

900 [°/sec]

Max. pulling speed

100 [m/min]

Mandrel diameter

Φ25 – Φ32 [mm]

Max. length of the stirrup side (diagonal)

1380 [mm]

Min. length of the stirrup side

120 [mm]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average electric power consumption

5.5 [KW]

Labeled electric power

27 [KW]

Voltage

380 [V] – 50 [Hz]

Overall machine weight

2,600 [Kg]

Overall dimension

8030 × 2005 × 2015 [mm]


Stirrup Bender WG12D-5X

Stirrup Bender WG12D-5 has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted


Features of Stirrup Bender WG12D-5X


 

Don't need to replace the mold to process bi-directional bending;

Wheels for straightening are large diameter ensures large pressing power and pressing area, all lower wheels are driven wheels, ensures fast and good quality straightening.

 

 

Fully automatic CNC stirrup bending machine has the integral mechanism design of straightening system, fulfil the domestic needs of the new three-level steel processing, anti-overload, high-temperature capability;

The machine can be connected with the software management system to achieve automatic data transmission and scan input.


More Detail Stirrup Bender WG12D-5X

Stirrup Bender WG12D-5X has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The bending and cutting unit of Stirrup Bender WG12D-5X, driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this cnc wire bending machine, many electric and pneumatic parts are imported from Japan and Germany, such as PLC, servomotor and reducer.

A CNC wire bending machine available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.

The Stirrup Bender WG12D-5X needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.

With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.


Technical Data of Stirrup Bender WG12D-5X


Production capacity

Single wire

Φ5 – 13 [mm]

Double wire

Φ5 – 10 [mm]

Max. bending angle

±135° [double direction]

Max. bending speed

300 [°/sec]

Max. pulling speed

110 [m/min]

Mandrel diameter

Φ20 – Φ24 [mm](customizable))

Max. length of the stirrup side (diagonal)

1380 [mm]

Min. length of the stirrup side

120 [mm]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average electric power consumption

4 [KW]/H

Labeled electric power

17 [KW]

Voltage

380 [V] – 50 [Hz]

Overall machine weight

2,000 [Kg]

Host dimension

3900-780-2230 [mm]


Stirrup Bender WG12B-2

The bending and cutting unit of Stirrup Bender WG12B-2(stirrups rebar), driven by servomotor, is equipped with turning and retractile bending pins


Features of Stirrup Bender WG12B-2


 未标题-4.jpg

Working angle can be rotated ensures a

 larger processing range, the max length of stirrup up to 2300mm;

It has automatic wire feeding system, 

shorten feeding time to 5 seconds, 

saved lots of time.

 

 

Straightening memory straight roll is being used, more convenient replacement of wire changing;

Fixed cutter can be used on both sides to improve the service life; cutting knife is designed with four available sides, service life increased by 4 times, greatly reducing costs.

 

 

Driven by full-closed-loop control 

servo motor which has high-precision, 

ensures the accuracy of length of ± 1mm, 

angle accuracy of ± 1 °


More Detail Stirrup Bender WG12B-2

Stirrup Bender WG12B-2(stirrups rebar) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The bending and cutting unit of  Stirrup Bender WG12B-2(stirrups rebar), driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this Stirrup Bender WG12B-2(stirrups rebar), many electric and pneumatic parts are imported from Japan and German, such as PLC, servomotor and reducer.

A Stirrup Bender WG12B-2(stirrups rebar) available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.

The Stirrup Bender WG12B-2(stirrups rebar) needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.


Technical Data of Stirrup Bender WG 12B-2

Production capacitySingle wireΦ5 – 13 [mm]
Double wireΦ5 – 10 [mm]
Max. bending angle±180° [double direction]
Max. bending speed1200 [°/sec]
Max. pulling speed110 [m/min]
Mandrel diameterΦ25 – Φ32 [mm]
Max. length of the stirrup side (diagonal)2,300 [mm]
Min. length of the stirrup side120 [mm]
Length tolerance± 1 [mm]
Bending tolerance± 1°
Average air-compressed consumption6 [l/min]
Average electric power consumption6 [Kw/h]
Labeled electric power28 [Kw]
Voltage380 [v] - 50 [Hz] - 3[phase]
Overall machine weight4,800 [Kg]
Overall dimension5,100 × 1,300 × 2,100 [mm]








Stirrup Bender WG12E

The automated wire bending and cutting unit of Stirrup Bender WG12E, driven by servomotor, is equipped with turning and retractile bending pins


Features of Stirrup Bender WG12E


 

It is designed with a large-scale working panel, easier operating, increase the scope of the stirrup can be machined, max length of stirrup up to 1670mm;

It has patented technology which is center invariable bi-directional bending mechanism, very efficient for two-way bending, double-bit bending axis set, a variety of optional mold for processing small size stirrups;

 

 

Machine has disc bending mechanism which avoids the stirrups collision and ensures the product pass rate of 100%;

Traction wheel has a non-slip groove to prevent reinforcement in the process of slipping, transmission efficiency;

 

 

Fixed cutter can be used on both sides to improve the service life; cutting knife is designed with four available sides, service life increased by 4 times, greatly reducing costs.


More Detail Stirrup Bender WG12E

Stirrup Bender WG12E has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The automated wire bending and cutting unit of Stirrup Bender WG12E, driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this Stirrup Bender WG12E, many electric and pneumatic parts are imported from Japan and German, such as PLC, servomotor and reducer.

A Stirrup Bender WG12B-2 available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.

The Stirrup Bender WG12E needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.

With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.


Technical Data of Stirrup Bender WG12E


Production capacity

Single wire

Φ5 – 12 [mm]

Double wire

Φ5 – 10 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

1100 [°/sec]

Max. pulling speed

100 [m/min]

Mandrel diameter

Φ25 – Φ32 [mm]

Max. length of the stirrup side (diagonal)

1440 [mm]

Min. length of the stirrup side

120 [mm]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average air-compressed consumption

6 [l/min]

Average electric power consumption

5 [KW]

Labeled electric power

25 [KW]

Voltage

380 [V] – 60 [Hz]

Overall machine weight

3,500 [Kg]

Overall dimension

8821 × 2160 × 2646 [mm]


Stirrup Bender WG12F

Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion.


Features of Stirrup Bender WG12F


 

This CNC intelligent processing machine is workable with a variety of stirrups and long plate reinforced, which is also multi-functional stirrup bending machine, changing plate reinforcement and stirrups function can be automatically switched within 2 seconds, which without any manual adjustment; 

Telescopic two-tier access to institutions, reliable, low noise;

Large structural design ensures processing with large range of wires, workable with the width of the bar hook up to 1m and the maximum length bar up to 12m bar; the largest stirrup side length up to 2100mm;

 

 

With a reverse correction mechanism to ensure that the finished product flatness of the bar;

Four-wheel servo-driven loopback mechanism designed to ensure the accuracy of returning of ± 1mm;

 

 

Machine has disc bending mechanism which avoids the stirrups collision and ensures the product pass rate of 100%;


More Detail Stirrup Bender WG12F

Stirrup Bender WG12F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The bending and cutting unit of Stirrup Bender WG12F, driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this wire stirrups bender WG12F, many electric and pneumatic parts are imported from Japan and German, such as PLC, servomotor and reducer.

A stirrup bender WG12F available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.

The stirrup bender WG12F needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.

With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.


Technical Data of Stirrup Bender WG12F


Production capacity

Single wire

Φ5 – 13 [mm]

Double wire

Φ5 – 10 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

1200 [°/sec]

Max. pulling speed

110 [m/min]

Mandrel diameter

Φ25 – Φ30 [mm]

Max shape length

12m

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average air-compressed consumption

6 [l/min]

Average electric power consumption

5 [KW]

Bending Pcs

≤2

Air pressure

≥0.6Mpa

Labeled electric power

26 [KW]

Bending shaps

600

Voltage

380 [V] – 50 [Hz]

Overall machine weight

5,160 [Kg]

Overall dimension

15050 × 1350 × 1900 [mm]



Stirrup Bender WG12G

Automatic multifunctional machine to work hot-rolled, cold-rolled or cold-drawn wire rod in coils, to produce a continuous automatically collected stirrup or single stirrup


Features of Stirrup Bender WG12G


 

Multifunctional stirrup bender is workable with stirrups length within 1380mm, can it can automatically process with 200mm-800mm spiral stirrups;

Two working modes can be automatically switched, automatic control switch within 30 seconds to complete, without manual adjustment;

 

 

 Advanced CNC five-axis linkage design, to ensure that a spiral set of stirrups with high efficiency, high-precision processing;

Advanced structural design, can achieve high-speed high-precision continuous bending 50 cycles;


More Detail Stirrup Bender WG12G

Function of Stirrup Bender WG12G

Automatic multifunctional machine to work hot-rolled, cold-rolled or cold-drawn wire rod in coils, to produce a continuous automatically collected stirrup or single stirrup. It is activated through digital servo-motors. In horizontal position downward it produces continuous stirrup, in the position tilted produces stirrups.

Stirrup Bender WG12G has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The bending and cutting unit of  Stirrup Bender WG12G, driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this Stirrup Bender WG12G, many electric and pneumatic parts are imported from Japan and German, such as PLC, servomotor and reducer.

A Stirrup Bender WG12G available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.

The Stirrup Bender WG12G needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.

With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.


Technical Data of Stirrup Bender WG12G


Production capacity

Single wire

Φ5 – 13 [mm]

Double wire

Φ5 – 10 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

1000 [°/sec]

Max. pulling speed

110 [m/min]

Mandrel diameter

Φ25 – Φ30 [mm]

Min. size length of continuous stirrup

200*200 [mm]

Max. size length of continuous stirrup

800*800 [mm]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average air-compressed consumption

6 [l/min]

Average electric power consumption

5 [Kw/Hr]

Labeled electric power

31 [Kw]

Voltage

380 [V] – 50 [Hz]


Stirrup Bender WG13B


Straightening mechanism has a position sensor which can accurately remember different steel straightening wheel pressure reduction, equipped with CNC memory straightening function which making the replacement of steel very simple and accurate.


Features of Stirrup Bender WG13B



 

Straightening mechanism has a position sensor which can accurately remember different steel straightening wheel pressure reduction, equipped with CNC memory straightening function which making the replacement of steel very simple and accurate;

It has straightening linkage adjustment mechanism which can achieve non-stop fine-tuning straightening;

It has automatic wire feeder which making the steel wire to wear only 5 seconds, saving time and effort;

 

 

Large long tube design to meet the processing of long U-shaped bar requirement (export Korean type);

Driven by full-closed-loop control servo motor which has high-precision, ensures the accuracy of length of ± 1mm, angle accuracy of ± 1 °;


Stirrup Bender WG16B

Stirrup Bender WG16B(steel bar bending machine) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion.


Features of Stirrup Bender WG16B


 

Working angle can be rotated ensures a larger processing range, the max length of stirrup up to 2450mm;

It has automatic wire feeding system, shorten feeding time to 5 seconds, saved lots of time ;

 

 

Straightening memory straight roll is being used, more convenient replacement of wire changing;

Fixed cutter can be used on both sides to improve the service life; cutting knife is designed with four available sides, service life increased by 4 times, greatly reducing costs.

 

 

Driven by full-closed-loop control servo motor which has high-precision, ensures the accuracy of length of ± 1mm, angle accuracy of ± 1 °;


More Detail Stirrup Bender WG16B

Stirrup Bender WG16B (steel wire bending machine) has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The bending and cutting unit of Stirrup Bender WG16B(steel wire bending machine), driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this CNC wire bending machine, many electric and pneumatic parts are imported from Japan and Germany, such as PLC, servomotor and reducer.

A CNC wire bending machine available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.

The Stirrup Bender WG16B(steel bar bending machine)  needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.

With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.


Technical Data of Stirrup Bender WG16B


Production capacity

Single wire

Φ6 – 16 [mm]

Double wire

Φ6 – 12 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

1200 [°/sec]

Max. pulling speed

100 [m/min]

Mandrel diameter

Φ20 – Φ42 [mm]

Max. length of the stirrup side (diagonal)

2500 [mm]

Min. length of the stirrup side

150 [mm]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average air-compressed consumption

12 [l/min], ≥0.9Mpa

Average electric power consumption

10 [KW/H]

Labeled electric power

68 [KW]

Voltage

380 [V] – 50 [Hz]

Overall machine weight

5,000 [Kg]

Overall dimension

5400*1350*2700 [mm]



Stirrup Bender WG16F

Stirrup Bender WG16F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion.


Features of Stirrup Bender WG16F



 

This CNC intelligent processing machine is workable with a variety of stirrups and long plate reinforced, which is also multi-functional stirrup bending machine, changing plate reinforcement and stirrups function can be automatically switched within 2 seconds, which without any manual adjustment;

Telescopic two-tier access to institutions, reliable, low noise;

Large structural design ensures processing with large range of wires, workable with the width of the bar hook up to 1 m and the maximum length bar up to 12m bar; the largest stirrup side length up to 2350mm;

 

With a reverse correction mechanism to ensure that the finished product flatness of the bar;

Four-wheel servo-driven loopback mechanism designed to ensure the accuracy of returning of ± 1mm;

Machine has disc bending mechanism which avoids the stirrups collision and ensures the product pass rate of 100%;



More Detail Stirrup Bender WG16F

Stirrup Bender WG16F has the particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torsion, which is driven by servomotor, thus ensuring a perfect straightening accuracy.

The bending and cutting unit of Stirrup Bender WG16F, driven by servomotor, is equipped with turning and retractile bending pins. After receiving a signal from the computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.

For this wire bender CNC machine, many electric and pneumatic parts are imported from Japan and Germany, such as PLC, servomotor and reducer.

A CNC wire bending machine available to the most 30 bends; 500 different stirrups parameter can be stored in the computer memory.

The Stirrup Bender WG16F needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.

With self-diagnosis, there are two standards exit, through which the electric encoder can be joined.


Technical Data of Stirrup Bender WG16F


Production capacity

Single wire

Φ6 – 16 [mm]

Double wire

Φ6 – 12 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

1200 [°/sec]

Max. pulling speed

100 [m/min]

Mandrel diameter

Φ20 – Φ42 [mm]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average air-compressed consumption

12 [l/min], ≥0.9Mpa

Average electric power consumption

10 [KW]

Labeled electric power

69 [KW]

Voltage

380 [V] – 50 [Hz]

Overall machine weight

11,000 [Kg]

Overall dimension

16130*2150*3050 [mm]

12B-2

OUR EQUIPMENT

TJK is the largest manufacturer in reinforced rebar processing machinery in China.
Contact Us        

about us/100% SATISFACTION RATE.

TJK is the largest manufacturer in reinforced rebar processing machinery in China.
TJK Machinery was founded in 1993, to be a corporation company in 2002, registered capital is RMB 71,500,000, In 2015 TJK successfully listed on the new three board as a public company. TJK has own professional R&D team,daily engaged in research,development and design of new products, up to now has over 100 models, 500 technical patents, to lay the foundation of TJK leading position in China.

CONTACT US

Company staffs sincerely welcome all friends at home and abroad to visit our company discussing cooperation.

China TJK Machinery Beijing Co., Ltd.

Tel: +86 10-84927034
Fax: +86 10-84928449
Mobile: +86 13910833898
Email: sales@chinatjk.com
Add: Room 1006, Building No.2, North Star New Era Plaza, Beiyuan Road, Chaoyang District, Beijing 100107, China

LEAVE A MESSAGE

X